platypus PSCGen6-10A, Руководство пользователя

Страница: 24 / 42

20
Platypus Controller ver-6.0.0
Additional Numbers
To Add/Edit an additional user touch on one of the "User" buttons. Select "User Name" or "User
Phone Number" and a keypad will be displayed allowing you to enter the user name or the
telephone number.
Touch on "Save" when complete. The new phone number will be saved and the Primary Phone
Number screen will be displayed. At any time touching on "Back" will return to the Additional
Numbers screen without saving any new information.
The Platypus Controller will only respond to commands from a registered user. Any commands
sent from a telephone number that is not the primary user or registered on the above list will
not be responded to.
If more than 3 minutes elapses and no buttons on this screen have been pressed, the Controller
will return to the home screen.
Evac
The red evacuation button is located on the gland plate at the bottom of the Platypus Controller,
see figure 1. Pressing this button will cause the Platypus Controller to become active for the
time period set below.
Touch on "Up" repeatedly to increase the Evac time period (max 255 minutes). Touch on
"Down" repeatedly to decrease the Evac time period.
All installed devices will remain active for the run time period, as set by the user in the Cycle
Times option on the System Settings Menu. After the run time period has elapsed all installed
devices will be de-activated for the pause period, as set by the user in the Cycle Times option on
the System Settings Menu.