Plastimo 68756, Инструкция по эксплуатации

Страница: 55 / 376

55
■
Front Panel
①
Menu Key [MENU]
·
Press this key to enter or exit the menu operation display interface.
②
Enter Key [OK]
·
Press this key to set the entered data, selected items, etc.
③
Left/Right Keys [
◄
]/[
►
]
·
Press to scroll through the softkey functions.
·
Press to select a character or number in input mode.
④
Up/Down Keys [
▲
]/[
▼
]
·
Press to select work channel, menu items, menu settings, etc.
·
Press to select a character or number in the entry in input mode.
⑤
Clear Key [BACK]
·
Press to cancel the settings, or exit the DSC menu.
⑥
Power/ Volume/ Squelch Knob [PWR/VOL/SQL]
·
Press and hold one second to power ON/OFF the transceiver.
·
Rotate or press to enter the volume setting display interface, then rotate to adjust the volume.
·
Press twice to enter the squelch level setting display interface, then rotate to adjust the squelch.
·
In the menu interface, rotate to select menu items.
·
In input mode, press to select a character or number, and rotate to move the cursor.
⑦
Channel 16 / Call Channel Key [16/C]
·
Press to select Channel 16.
·
Press and hold for one second to select Call Channel (Default Channel 9).
“ ” appears when the Call channel is selected.
⑧
Softkeys[ ]
·
Press [
◄
] or [
►
] to scroll through the key functions at the bottom of the display, then press the 4
softkeys [ ] to select the key function.
·
The definition of the softkeys is described in the following description.
⑨
Distress Key [DISTRESS]
·
Open the cover, press and hold this key for 3 seconds to transmit a Distress call.
■
Softkeys
Various often-used fucntions are assigned to the softkeys[ ]for easy access. The functions' icons are
displayed above the softkeys[ ], as shown below.
NOTE: The displayed icons or their order may differ, depending on the presetting by programming
software.When the MMSI code is not set, the softkeys for DSC function are not displayed.
◆
Using the Softkeys