Plastimo 68756, Инструкция по эксплуатации

Страница: 89 / 376

89
◆
Scan Timer
Scan Timer can be set as OFF or ON.
While set as OFF, when a signal is detected on a channel, the scan pauses until the signal disappears,
and then resumes.
While set as ON, when a signal is detected on a channel, the scan pauses for 5 seconds, and then
resumes. If the signal disappears in less than 5 seconds, the scan immediately resumes.
◆
Dualwatch/Tri-watch
Select Dualwatch or Tri-watch, see corresponding chapter for details.
◆
Channel Group
Select the suitable channel group for your operating area, including USA, INT, CAN Channel Group.
◆
Call Channel
You can change your Call channel.
◆
WX Alert
When there is any important weather information, an NOAA broadcast station transmits a Weather Alert
tone. While WX Alert function is ON,
“ ” is displayed instead of “ WX ” . When detecting an alert, an
alarm sounds and “ ” blinks.
·
ON with Scan: The preset Weather channels are sequentially checked while scanning.
·
ON: The previously selected (last used) Weather channel is checked while scanning.
·
OFF: The Weather Alert tone is not detected.
◆
FAV Settings
You can set all channels as Favorite channels, clear all settings, or reset to default. By default, some
channels are preset.
·
Set All Channels: Sets all channels as Favorite channels.
·
Clear All Channels: Clears all Favorite channels.
·
Set Default: Resets Favorite channels to the default.
◆
FAV on MIC
You can select the channel set when you press [
▲
]/[
▼
] on the supplied microphone.
◆ CH Display
You can select the number of digits to display the channel number, 3 Digits or 4 Digits.
◆
CH Close-up
You can select whether or not to display the channel name when changing the operating channel. While
the function is ON, when you press [
▲
]/[
▼
] to select channels, the selected channel number and name
will display for 1 second, then return to normal screen.
◆
Language Setting
You can select English or French language by the menu item “ Language ” under “ Radio Setting ” .
1. Press [MENU], the Menu screen is displayed.
2. Press [
▲ ]/[ ▼ ] or rotate [PWR/VOL/SQL] to select “Radio Setting”, then press [OK] .
3. Press [ ▲ ]/[ ▼ ] or rotate [PWR/VOL/SQL] to select “Language”, then press [OK] .
4. Press [
▲
]/[
▼
] or rotate [PWR/VOL/SQL] to select the required language, then press [OK]
5. Press softkey [ ] to exit the Menu screen.