Plastimo 68756, Инструкция по эксплуатации

Страница: 62 / 376

62
Backlight brightness of the LCD display and keypads can be set by this function, totally 7 levels of
brightness and OFF optional.
1. Press [MENU] key, the menu interface is displayed.
2. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ Configuration ” , then press [OK], the “ CONFIGURATION ”
screen is displayed.
3. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ Backlight ” , then press [OK], the “ BACKLIGHT ” screen is
displayed.
4. Press [
▲
]\[
▼
] or rotate [DIAL] knob to adjust the backlight brightness.
5. Press [OK] to confirm.
·
Press softkey [ ] to return to main interface.
■
Display Contrast
LCD display contrast can be set by this function, totally 8 levels optional.
1. Press [MENU] key, the menu interface is displayed.
2. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ Configuration ” , then press [OK], the “ CONFIGURATION ”
screen is displayed.
3. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ Display Contrast ” , then press [OK], the “ CONTRAST ”
screen is displayed.
4. Press [
▲
]\[
▼
] or rotate [DIAL] knob to adjust the display contrast.
5. Press [OK] to confirm.
·
Press softkey [ ] to return to main interface.
■
Vibration Water Draining Function
Vibration helps drain water away from the speaker housing (water that might otherwise muffle the sound
coming from the speaker). The transceiver makes a vibrating noise when this function is being used.
NOTE:Do not use the vibrationwater draining function when connecting an external speaker.
1. Press [
◄
]\[
►
] to display [ ].
·
“ VIB WATER ” interface is displayed.
2. Press and hold softkey [ ],the transceiver emits a low sound for draining.
3. Release softkey [ ] to turn vibrationwater draining function OFF.
■
Microphone Lock Function
The microphone lock function electrically locks all keys except for [PTT] on the supplied microphone. This
prevents accidental channel changes and function access.
1. Press and hold [DIAL] knob for one second to power OFF.
2. While pressing and holding [H/L] on the microphone, power ON to toggle the microphone lock function