Plastimo 68756, Инструкция по эксплуатации

Страница: 83 / 376

83
Press[ ]: Ingores the call and returns to the operating screen.
•
The call is saved in the DSC Log.
•
” ” blinks continuously until you display the call message.
Press [ ]: Sends the Acknowledgement “ Able to Comply ” .
•
The call is saved in the DSC Log.
Press [ ]: Accepts the call.
•
The received call ’ s information is displayed.
•
The call is saved in the DSC Log.
Press softkey [ ], then press [ ] to send a Test Acknowledgement call.
Press softkey [ ] to resend.
NOTE: If the Auto ACK function in “ DSC Settings ” is set to “ Auto ” , the Test Acknowledgement call is
automatically sent to the calling station when the call is received.
◆
Sending a Test Acknowledgement Call
By default, when you receive a Test call, the Auto ACK function automatically sends an Acknowledgement
to the calling station. If the function is set to
“ Manual ” , do the following steps to send an Acknowledgement.
1. After a Test call is being received, press [ ] to turn OFF the alarm.
2. Press softkey [ ], the received call ’ s information is displayed.
3. Press softkey [ ], the “ Test ACK ” confirmation screen is displayed.
4. Press softkey [ ] to send the Acknowledgement, “ Transmitting Test Ack ” is displayed.