Plastimo 68756, Инструкция по эксплуатации

Страница: 58 / 376

58
●“ ”displayed while transmitting.
2
Status Indicator ●“ ” displayed when in the standby mode.
●“ ” displayed when the channel is changed while receiving or
transmitting a signal.
3
Favorite Channel Icon ●“ ” displayed when the Favorite channel is selected.
4
Operating Channel
Number
● Displays the selected operating channel number, can display 4 digits
channel number.
●“ A ” or “ B ” is displayed when a simplex channel is selected.
5
Softkeys Function
Display
● The functions of softkeys are displayed.
6
Position/Time Readouts ● Readouts the current position and time when valid GPS data is
received or when manually input.
● “ NO POS NO TIME ” is displayed if no GPS data has been received,
and then a warning message is displayed for 2 minutes after turning ON
the transceiver.
● “ ?? ” blinks if no GPS data is received for 30 seconds after receving
valid GPS data, and then “ ?? ” and a warning message are displayed
after 10 minutes.
● A warning message is displayed if no GPS data is received for 4 hours
after receiving valid GPS data.
● A manually input GPS data is valid for 23.5 hours, and then a warning
message is displayed.
7
Scan Indicator ●“ SCAN 16 ” is displayed while Priority Scan, “ SCAN ” is displayed while
Normal Scan.
●“ DW 16 ” is displayed while Dualwatch, “ TW 16 ” is displayed while Tri-
watch.
8
Channel Group Indicator ●“ USA ” is displayed when USA channel group is selected.
●“ INT ” is displayed when International channel group is selected.
●“ CAN ” is displayed when Canada channel group is selected.
●“ WX ” is displayed when Weather channel group is selected.
● When the WX- Alert is set to ON, “ ”is displayed instead of “WX”.
9
Attenuator Icon
●“ ” is displayed when RF attenuation is ON.
10
Duplex Channel
Indicator
●“ ” is displayed when a Duplex channel is selected.
11
GPS StatusIcon ● GP: GPS; GN: GPS+GLONASS;
DGP: SBAS+GPS;
DGN: SBAS+GPS+GLONASS
12
Call Channel Indicator ●“ ” is displayed when a Call channel is selected.
13
GPSPositioningIcon ● Displayed when valid GPS position data (Including GPS and
GLONASS) is received.
● Blinks when received GPS position data is invalid.
14
Message Icon
●“ ” is blinked when there is an unread DSC message, “ ”
disappears when the message has been read.
15
Output Power Icon ●“25W” is displayed when high power is selected.
●“1 W ” is displayed when low power is selected.
BASIC OPERATION