Plastimo 68756, Инструкция по эксплуатации

Страница: 59 / 376

59
■
Power ON/OFF
1.
Press and hold [PWR] knob for 1 second to power ON.
2.
Press and hold [PWR] knob for 1 second again to power OFF.
■
Transmitting and Receiving
◆
Transmitting
1
.
Press [H/L] key on the microphone to select the output power if necessary.
·
” LOW ” appears when low power is selected.
·
Choose low power for short range communication, choose high power for longer distance
communication.
·
Some channels are with low power only.
2.
Press and hold [PTT] key to transmit, then speak into the microphone.
·
“ ” appears.
·
CH70 is for DSC transmitting only.
3.
Release [PTT] to receive.
NOTE: Do not transmit before connecting the antenna, this will ruin the transceiver.
If the TOT function is enabled by the PC programming software, the transmission time-limited protection
function prohibits continuous transmission for a long time.
◆
Receiving
Volume Adjustment:
1. Rotate [VOL] knob to adjust the volume, volume adjustment interface is displayed.
2.If no key is pressed within 5 seconds, the interface will automatically exit.
Squelch Level Adjustment
1. Press [SQL] knob twice, squelch level adjustment interface is displayed.
2. Rotate [SQL] knob to adjust the squelch level.
3.If no key is pressed within 5 seconds, the interface will automatically exit.
■
Channel Group Selection
Channel Groups are preset into this transceiver.
1. Press [MENU] key, the menu interface is displayed.
2. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ Radio Settings ” , then press [OK], the “ RADIO SETTINGS ”
screen is displayed.
3. Press [
▲
]\[
▼
] or rotate [DIAL] knob to select “ Channel Group ” , then press [OK], the “ CHANNEL
GROUP ” screen is displayed.
4.Press [
▲
]\[
▼
]or rotate [DIAL] knob to select a ChannelGroup, then press [OK], the selected Channel
Group Iconis displayed on the operating screen. Press [ ] to exitthe menu screen.