Planmeca Creo C5, Руководство пользователя

Страница: 18 / 62

8.2 Approved resins
NOTE
Read the Planmeca “Instructions For Use” before using any of the listed
resins.
Only the following resins by Dreve are approved for use with the Planmeca
Creo C5 3D printer.
•
FotoDent guide
• FotoDent model
• FotoDent setup (dental model material)
The list of approved resins is subject to change. Please check the latest
manual for an updated list.
Only the 30cc resin cartridges supplied by Planmeca and labelled
withPlanmeca's QR codes can be used
8.2.1 FotoDent model
FotoDent model material is a 3D printing material suited for printing dental
models. The FotoDent model material produces accurate and detailed dental
models that work perfectly as a base for dental technical work.
The following table lists the FotoDent model material properties.
Characteristics
Colour
Beige opaque
Density
approx. 1.1 - 1.2 g/cm
3
Viscosity (23°C) 0.8 - 1.3 Pa s
Flexural strength 60 - 70 MPa
Flexural modulus 2.3 - 2.5 GPa
Composition
1
(Meth)acrylates
2 Initiators
3 Pigments
Cured material
Flexural modulus
≥ 1750 MPa
Flexural strength ≥ 85 MPa
Elongation at break 11 - 15 %
8.2.2 FotoDent guide
FotoDent guide material is 3D printing material suited for printing surgical
guides. FotoDent guide material has CE medical approval.
The following table lists the Planmeca Surgical Guide material properties.
Characteristics
Colour
Blue transparent
Density
1.1 - 1.2 g/cm
3
Viscosity (23°C) 0.65 - 1.05 Pa s
8 Resin handling
12 Planmeca Creo C5 User's manual