Planmeca Creo C5, Руководство пользователя

Страница: 17 / 62

8 Resin handling
CAUTION
Do not place the printer or any resin-touching components, for example the
basin or build platform, in areas of high sunlight.
CAUTION
Always wear suitable nitrile gloves and eye protection when handing printer
resins and parts that have not been post-cured.
CAUTION
Use of the printer involves the use of sharp tools. Using these tools on the
resin covered build platform can lead to sudden movement. Always use the
removal scraper away from yourself and your hands.
NOTE
Ensure adequate ventilation when working with resins.
As sunlight has a high UV content, handling of uncured resin should be done
away from strong sunlight. Artificial light also contains a UV component and
as such resin should be kept in its original container with the cap on. The
basin should be kept in the printer with the lid closed or in its UV protected
storage box. When not being used for printing, all parts should be cleaned
from uncured resin.
Before using any resin ensure that:
•
The operator is familiar with the specific safety requirements for that
resin.
• The working area is clean and free fromany hazards that could lead to a
spill.
• The working area has a tray large enough to hold the build platform and
any printed parts.
• There is an adequate supply of absorbent towels to deal with any spills
should they occur.
Have a suitable resin proof container ready to place the build platform before
removal from the printer.
8.1 Precautions
• Only use approved resins with the Planmeca Creo C5 Printer as listed in
section "Approved resins" on page 12.
• Always wear nitrile gloves, covered arms and legs, and eye protection.
• Ensure all use of resin is undertaken in a well ventilated area.
• Ensure a spill kit is available.
• Ensure a suitable container is available to place the build platform and
printed parts in.
• Ensure that a supply of isopropyl alcohol (IPA) (96%) or ethanol (96%) is
available for cleaning the build platform and printed parts.
8 Resin handling
User's manual Planmeca Creo C5 11