Planmeca Creo C5, Руководство пользователя

Страница: 14 / 62

CAUTION
To avoid damage of internal components, do not place the printer on a
vibrating surface.
CAUTION
Using electrical power
•
Operate the printer only from the type of power indicated on the marking
label. If you are not sure of the type of power available, consult your
dealer or local power company.
• Do not allow anything to rest on the power cord. Do not locate the printer
where people will walk on the cord.
• If an extension cord is used with the printer, make sure that the total
ampere rating of the equipment plugged into the extension cord does not
exceed the extension cord ampere rating. Also, make sure that the total
rating of all products plugged into the wall outlet does not exceed the
fuse rating.
• Do not overload a power outlet, strip or receptacle by plugging in too
many devices. The overall system load must not exceed 80 % of the
branch circuit rating. If power strips are used, the load should not exceed
80 % of the power strip's input rating.
• The printer’s AC adapter is equipped with a three-wire grounded plug.
The plug only fits in a grounded power outlet. Make sure the power outlet
is properly grounded before inserting the AC adapter plug. Do not insert
the plug into a non-grounded power outlet. Contact your electrician for
details.
CAUTION
The grounding pin is a safety feature. Using a power outlet that is not
properly grounded may result in electric shock and/or injury.
NOTE
The grounding pin also provides good protection from unexpected noise
produced by other nearby electrical devices that may interfere with the
performance of the printer.
Use the printer only with the supplied power supply cord set. If you need to
replace the power cord set, make sure that the new power cord meets the
following requirements: detachable type, UL listed / CSA certified, VDE
approved or its equivalent.
7 For your safety
8 Planmeca Creo C5 User's manual