Planmeca Creo C5, Руководство пользователя

Страница: 47 / 62

2. Using the scraper work it gently under one corner of the print. Repeat
working the scraper under all the corners. Rotate the platform if required.
3. Be gentle when using the scraper around the edges, and gradually
separate the print from the platform.
To make part removal easier and reduce the chance of platform
damage, use the scraper at the shallowest angle possible.
4. Once the print is free of the build platform it needs to be post-processed.
The prints need to be cleaned from uncured resin and cured in an UV
curing unit before use.
For more post-processing instructions, see the resin’s own instructions.
12.3 Cleaning build platform
After the printed part has been removed from the build platform it should be
cleaned from uncured resin with isopropyl alcohol (IPA) or ethanol. Use only
solvents that leave no residue. If available, use of an ultrasonic tank will
help. When handling the build platform, always wear gloves. Any
contamination of the printing surface can lead to failed prints.
NOTE
Dry the build platform thoroughly to ensure that no IPA / ethanol (96 %)
remains on the surfaces, as this can interfere with the print.
NOTE
The build platform should be cleaned at least once a day at the end of the
workday
1. Using IPA / ethanol (96 %) clean the build platform every time you finish
printing.
2. Clean the platform with a steam cleaner. Otherwise rinse thoroughly in
IPA / ethanol (96 %) bath.
12 After printing
User's manual Planmeca Creo C5 41