Planmeca Creo C5, Руководство пользователя

Страница: 15 / 62

7.3 Caution for servicing
CAUTION
Do not attempt to service the printer yourself, as opening or removing covers
may expose you to dangerous voltage points or other risks. Refer all
servicing to qualified service personnel. Unplug this printer from the wall
outlet and refer servicing to qualified service personnel when:
•
the power cord or plug is damaged, cut or frayed
• liquid was spilled into the printer
• the printer is exposed to rain or water
• the printer is dropped or the case is damaged
• the printer exhibits a distinct change in performance, indicating a need
for service
• the printer exhibits strange noises or odours
• the printer does not operate normally after following the operating
instructions.
CAUTION
For safety reasons, do not use non-compliant parts when adding or
changing components. Consult your Planmeca dealer for purchase options.
CAUTION
Your device and its enhancements may contain small parts. Keep them out
of the reach of small children.
NOTE
Adjust only those controls that are covered by the operating instructions,
since improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the printer to
normal condition.
7.4 Additional safety information
• Always wear suitable nitrile gloves and eye protection when handing
printer resins and parts that have not been post-cured.
• Have a flat stable surface ready to place the basin before removal from
the printer.
• Have a suitable resin proof container ready to place the platform before
removal from the printer.
• Do not look into the printer's LCD when printing. The bright UV light may
hurt your eyes.
• Do not place the printer in the following environments:
•
Non air-conditioned space
• Space that is poorly ventilated or confined. At least 50 cm side
clearance from walls and free flow of air around the printer are
necessary.
• Locations where temperatures may become excessively high.
• Locations where excessive humidity, dust, or cigarette smoke may
contaminate optical components and shorten the lifespan.
• Locations near fire alarms.
7 For your safety
User's manual Planmeca Creo C5 9