Planmeca Creo C5, Руководство пользователя

Страница: 26 / 62

10 Preparations before printing
10.1 Attaching basin
1. Place the basin to the back of the printer.
2. Gently tigthen the screws on both sides of the basin to secure it in place.
NOTE
Ensure that the basin is securely fastened in place. A poorly secured
basin may cause failed prints.
10.2 Calibrating build platform
The Planmeca Creo C5 3D printer does not need any complicate calibration
procedures.
When taking first time into use and after some maintenance tasks (e.g.
replacing parts) it is appreciable to carry out the build platform calibration.
1. Switch on the printer.
2. Drive the printer lid up.
In the printer control panel, touch the UP button.
3. Set the printer accessories as follows.
Attach:
•
build platform
• basin
Remove:
10 Preparations before printing
20 Planmeca Creo C5 User's manual