Planmeca Creo C5, Руководство пользователя

Страница: 13 / 62

7 For your safety
Read these instructions carefully. Keep this document for future reference.
Follow all warnings and instructions marked on the Planmeca Creo C5 3D
printer.
CAUTION
Do not use under the following conditions:
•
In hot, cold or humid environments.
• In areas susceptible to excessive dust and dirt.
• Near any appliance that generates a strong magnetic field.
• Locations with an ambient temperature above 25ºC.
7.1 Connecting and disconnecting printer
Observe the following guidelines when connecting and disconnecting power
to the printer:
•
Install the printer before connecting the power cord to the AC power
outlet.
• Unplug the power cord before moving the printer.
7.2 Caution for accessibility
Ensure that the power outlet you plug the power cord into is easily
accessible and located as close to the printer as possible. If you need to
disconnect power to the printer, unplug the power cord from the electrical
outlet.
CAUTION
Do not use the printer near water.
CAUTION
Do not place the printer on an unstable cart, stand or table. If the printer
falls, it could cause injury and or damage.
CAUTION
Do not place the printer on any surface that is not rated to withstand the
printer’s weight.
CAUTION
Slots and openings are provided for ventilation to ensure reliable operation
of the printer and to protect it from overheating. These openings must not be
blocked or covered. The openings should never be blocked by placing the
printer on a soft surface or too close to a wall.
CAUTION
Do not place the printer near or over a radiator or heat register, or in a built-
in installation unless proper ventilation is provided.
CAUTION
Never push objects of any kind into this printer through cabinet slots as they
may touch dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind onto or into the printer.
7 For your safety
User's manual Planmeca Creo C5 7