Planex CQW-AP108AG страница 230 Скачать руководство пользователя

Страница: 230 / 301

Managing the AP Configuration

Installation and Configuration Guide, (CQW-AP108AG)

217

Figure 163:

Configuration Management - Secure Backup

Configuration Reports

Select any of the following configuration reports on this tab (Figure 164):

Restore the AP
configuration

In the Restore Configuration area, click

Browse

and select the

configuration file.

Click

Apply

to restore the configuration and reboot the AP.

NOTE:

If the AP has been unenrolled or restored to factory defaults, it is not

possible to reapply the configuration using this method. The AP must be
reenrolled and have a new configuration created.

Generate support logs

Click

Generate Support Logs

When the configuration is generated, a hyperlink is displayed. Right-click
and select

Save As

to save the configuration locally.

After the support logs file is saved, click

Delete

to remove the file from the

AP. The file takes up space on the AP disk, so it is recommended to
remove it.

Report

Description

Startup-Config

Provides details on the configuration that is stored on the AP flash device and
used each time the AP reboots.

Running-Config

Provides details on the current AP configuration, which may or may not
match the startup configuration.

Default-Config

Lists the factory default settings shipped on the AP.

Task

Steps

Содержание CQW-AP108AG














































































































































































































































































































Результаты поиска

Содержание CQW-AP108AG

Отзывы:

Похожие инструкции для CQW-AP108AG

Бренды по названию

Популярные бренды

Planex CQW-AP108AG, Руководство по установке и настройке

Результаты поиска

Содержание CQW-AP108AG

Отзывы:

Похожие инструкции для CQW-AP108AG

Бренды по названию

Популярные бренды