Planet Content Security Gateway CS-500 Скачать руководство пользователя страница 45

Страница: 45 / 215

Content Security Gateway User’s Manual

IP Address:

The dynamic IP address obtained by the Content Security Gateway from the ISP will be

displayed here. This is the IP address of the WAN port of the device.

MAC Address:

This is the MAC Address of the device.

Hostname:

This will be the name assign to the device. Some cable modem ISP assign a specific

hostname in order to connect to their network. Please enter the hostname here. If not required by
your ISP, you do not have to enter a hostname.

Domain Name:

You can specify your own domain name or leave it blank.

User Name:

The user name is provided by ISP.

Password:

The password is provided by ISP.

Max. Upstream/Downstream Bandwidth:

The bandwidth provided by ISP.

Ping:

Select this to allow the WAN network to ping the IP Address of the Content Security Gateway.

This will allow people from the Internet to be able to ping the Content Security Gateway. If set to
enable, the device will respond to echo request packets from the WAN network.

HTTP:

Select this to allow the device WEBUI to be accessed from the WAN network. This will allow

the WebUI to be configured from a user on the Internet. Keep in mind that the device always requires
an username and password to enter the WebUI.

For Static IP Address:

This option is for users who are assigned a static IP address from their ISP. Your ISP

will provide all the information needed for this section such as IP address, Netmask, Gateway, and DNS.

Use this option also if you have more than one public IP Address assigned to you.

IP Address:

Enter the static IP address assigned to you by your ISP. This will be the public IP

address of the WAN port of the device.

Netmask:

This will be the subnet mask of the WAN network. (i.e. 255.255.255.0)

Default Gateway:

This will be the Gateway IP address.

Domain Name Server (DNS):

This is the IP address of the DNS server.

Max. Upstream/Downstream Bandwidth:

The bandwidth provided by ISP.

- 40 -

Содержание Content Security Gateway CS-500
























































































































































































































Результаты поиска

Содержание Content Security Gateway CS-500

Отзывы:

Бренды по названию

Популярные бренды

Planet Content Security Gateway CS-500, Руководство пользователя

Результаты поиска

Содержание Content Security Gateway CS-500

Отзывы:

Бренды по названию

Популярные бренды