Planet Content Security Gateway CS-500, Руководство пользователя

Страница: 160 / 215

Content Security Gateway User’s Manual
Step 2:
Configure all the parameters.
Source Address:
Select the name of the LAN network from the drop down list. The drop down list
contains the names of all LAN networks defined in the LAN section of the
Address
menu. To create a
new source address, please go to the LAN section under the
Address
menu.
Destination Address:
Select the name of the WAN network from the drop down list. The drop down
list contains the names of all WAN networks defined in the WAN section of the
Address
window. To
create a new destination address, please go to the WAN section under the
Address
menu.
Service:
Specified services provided by WAN net work servers. These are services/application that
are allowed to pass from the LAN network to the WAN network. Choose ANY for all services.
Schedule
: Select the item listed in the schedule to enable the policy to automatically execute the
function in a certain time and range.
Authentication User:
Select the item listed in the Authentication User to enable the policy to
automatically execute the function in a certain time and range.
Tunnel:
Select the specific VPN tunnel to enable the VPN traffic in Policy rule.
Action:
Select Permit or Deny ALL from the drop down list to allow or reject the packets travelling
between the source network and the destination network.
Traffic Log:
Select Enable to enable flow monitoring.
Statistics:
Select Enable to enable flow statistics.
IDP:
Check to enable IDP feature.
Content Blocking:
Select Enable to enable Content Blocking.
Max. Concurrent Sessions:
The maximum concurrent sessions that allows passing through CS-500.
0 means it is unlimited.
QoS:
Select the item listed in the QoS to enable the policy to automatically execute the function in a
certain time and range.
Step 3:
Click
OK
to add a new outgoing policy; or click
Cancel
to cancel adding a new outgoing policy.
Modifying an Outgoing policy
Step 1:
In the
Outgoing
policy section, locate the name of the policy desired to be modified and click its
corresponding Modify option under the Configure field.
Step 2:
In the
Modify Policy
window, fill in new settings.
NOTE:
To change or add selections in the drop-down list for source or destination address, go to the section
where the selections are setup. (Source Address
→ LAN of
Address
menu; Destination Address →
WAN of
Address
menu; Service → [Pre-defined], [Custom] or Group under
Service
).
Step 3:
Click
OK
to do confirm modification or click
Cancel
to cancel it.
- 155 -