THH960
User Manual
(v1.6)
33
Step 4 Use the "T2" dial to select a second temperature from a defined region
measurement or Tref.
Step 5 If the "T1" or "T2" setting uses Tref, use the "Tref" dial to select the Tref value.
Step 6 Tap the screen outside of the menu area to complete the setting.
3.2.2.7
Delete a temperature measurement region
There are two ways to delete existing temperature measurement regions: (1)
individually
,
by deleting only the selected region and (2)
all
, which deletes all temperature
measurement regions.
•
Deletion of an individual temperature measurement region is accomplished with the
steps:
Step 1 Select the region of interest using the steps outlined in 3.2.2.2.
Step 2 Reenter the Measure/Capture submenu
(as needed) and tap the icon to
delete the selected temperature measurement region.
•
Deletion of all measurement regions is accomplished with the steps:
Step 1 Tap the
icon in the home screen followed by the measurement tools icon
.
Step 2 Tap the trash icon appearing in the measurement tool submenu to delete
all temperature measurement regions (this assumes that an individual region
has not been selected).
