Pixsys ATR 142 Series, Руководство пользователя

Страница: 39 / 128

User manual - ATR 142 39
9.2.2
Master Mode Remote process
To enable this function it is necessary to select
r.pro.
on para-
meter 59
mast
. In this mode the process value on ATR142 is a
value read via serial communication. The ID of the slave must
be same as value selected on parameter 57
sL.ad.
and the
word to read is selected on parameter 60
add.r
. Two successi-
ve pollings will be delayed for the time selected on parameter
57
se.de.
The read value might be rescaled according to the
proportion described in the following table:
mast.
Limits of read value Limits of rescaled value
Min Max Min Max
r.pro.
Read
Process
Lo.L.r.
Lower
Limit Re-
transmis-
sion
up.L.r.
Upper
Limit Re-
transmis-
sion
Lo.L.i.
Lower Limit
Input
up.L.i.
Upper Limit
Input
10
Configuration
10.1
Modify Configuration Parameter
For configuration parameters (par. 11.)
Press Effect Do
1
FNC
for 3 sec.
Display 1 shows
0000
with the 1st digit
flashing, while display
2 shows
pass
.
2
or
Change the flashing
digit and move to the
next one using the
SET
key.
Enter password
1234