Pixsys ATR 142 Series, Руководство пользователя

Страница: 27 / 128

User manual - ATR 142 27
8
Timer operation
Timer operation is enabled by parameter 63
tmr.f.
To modify
duration of counting time, follow the steps below:
Press Effect Do
1
SET
Press until
tim. 1
or
tim. 2
visualized on
display 1.
2
or
Digits on display 2
changes.
Increase or decrease
time value for the
selected timer.
Below a description of available options for Timer operation.
8.1
Single Timer
This option enables one single Timer and the time is selecta-
ble by the operator.
To achieve this operation set parameter 63
tmr.f.
as follows:
•
s.tm.s.
(Single Timer Seconds) time-basis in seconds (mm.ss)
•
s.tm.m.
(Single Timer Minutes) time-basis in minutes (hh.mm)
To start/stop the Timer, press
FNC
for 1 “.
During the counting, Led
R
is On and display2 shows decre-
menting time. At elapsing of Timer, led R switches off and
display 2 flashes, visualising the programmed time until any
key is pressed.
Start/Stop of Timer is possibile also by digital input, selecting
t.1.s.s.
on parameter 50
dGt.i.