Pixsys ATR 142 Series, Руководство пользователя

Страница: 20 / 128

20 ATR 142 - User manual
7.8
Memory Card (optional)
Parameters and setpoint values can be duplicated from one
controller to another using the Memory card.
There are two methods:
• With the controller connected to the power supply
Insert the memory card when the controller is off .
On activation display 1 shows
memo
and display 2 show
----
( Only if the correct values are saved in the memory
card
). By pressing the key display 2 shows Load , then
confirm using the
FNC
key. The controller loads the new data
and starts again.
• With the controller not connected to
power supply
.
The memory card is equipped with
an internal battery with an autonomy
of about 1000 operations.
Insert the memory card and press the
programming button .
When writing the parameters, the led turns to red and on com-
pleting the procedure it turns to green. It is possible to repeat
the procedure without any particular attention.
WARNUNG
Updating Memory Card
To update the memory card values, follow the procedure
described for the first method, setting display 2 to
---- so as
not to load the parameters on controller
1
.
Enter configuration level and change at least one parameter.
Exit configuration. Changes are saved automatically.
1
If on activation the controller does not display
memo
it means no data
have been saved on the memory card, but it is possible to update values.