Chapter 2
PB731P/PB731I
User’s Manual
Installation and Setup
3
2 Installation and Setup
2.1 Table, Ceiling, and Wall Mounting of Camera
1. Use the 2 supplied screws to mount the mounting bracket to a flat surface.
2. Loosen the lock ring to adjust the Camera to the desired angle.
3. Tighten the lock ring to firmly fix the angle position.
Table Mounting
Ceiling Mounting
Wall Mounting
Figure 2-1 Camera Mounting Methods
NOTE
Always mount the Camera on mounting bracket to prevent over heating.
2.2 Connecting Camera to Network
2.2.1 Through LAN Router Cable
Figure 2-2 Connecting IP Camera to Network
Lock Ring
LAN Router
Power Adaptor
The PC host is required only
to set up the camera with
“
Installation Guide Wizard
”
program when the camera
Power/Network LED
Indicator does not light up in
green within few seconds
after power on.
Mounting Bracket
Содержание PB731I
Страница 1: ...PB731P PB731I Wi Fi Network Camera Getting Started Handbook Version 1 21 PiXORD Corporation May 2013...
Страница 12: ...Chapter 2 6 Installation and Setup PB731P PB731I User s Manual...
Страница 35: ...PB731P PB731I Wi Fi Network Camera Webpage Setting User s Guide Version 1 01 PiXORD Corporation June 2013...