PiXORD PB731I, Руководство по началу работы

Страница: 66 / 72

Chapter 2
32

Setup Execution PB731P/PB731I
Webpage Setting User’s Guide
2.4.3 Snapshot Tab
The Snapshot tabbed pane sets the Camera to take snapshot images when
motion is detected. The four methods available for selection are Always,
Schedule, Motion, and PIR
(passive infrared), each of which can be set up with
user scheduled recoding time and duration, as well as defining the video record
file target destination.

Always: Under this method, the Camera automatically continuous to capture
6 snapshots of the area under surveillance at every 1 or 2 seconds
interval. 3 previous snapshot frames are collected from the Camera
buffer and 3 snapshot frames are captured live. The stream of
accumulated snapshots may be sent to host by E-mail, FTP, or
stored in the SD card as preferred.
Figure 2-25
Snapshot Recording with “Always” Method Selected
6 snapshots are continuously
collected at every 1 or 2
seconds interval.