– Installation
1. Take out the bracket from the box first. Put the power cable and Ethernet cable through the bracket and then fix it to
the wall (FIG.1 & FIG.2).
2. Secondly, take out the housing and open the top cover with hexagon screw driver (FIG.3). Loosen the screws on
both sides of the supporter first, use provided 1/4"-20UNC screws (black-2pcs) to fix the camera on the supporter
temporarily (FIG.4). Plug and fix the power cable of camera to the terminal (FIG.5).
Note:
In order to adjust the camera position forward or backward later on, please do not fix the camera too tight.
- 9 -
