– Motion
Area
The
“Motion Detection”
icon
(Configuration>Event>General>Trigger)
must be enabled when use
this function.
To set the area on video for motion detection:
1. Use Mouse to drag out a detection area on the video.
2. Left-click the area and drag the corner to change the size.
3. Right-click the area and select “Property”.
4. Check “Enable”, click “OK” and click “Apply”.
Note:
Green blocks indicate this area is enabled for detection.
Red blocks indicate this area is not enabled for detection.
z
Apply:
Saves the changes made.
- 44 -
