3. Put the power cable and Ethernet cable through the bottom of the housing (FIG.6). Plug and fix the power cable to
the terminal and plug the Ethernet cable to video output of the camera (FIG.7).
Next, use the provided 1/4"-20UNC screws (silver-4pcs) to fix the housing on the bracket with hexagon screw driver
(FIG.8).
4. Adjust the focus and iris of the lens on the camera and then adjust the camera position on the supporter (FIG.9 &
FIG.10). The camera comes with a lens of F7.5 ~ 50 mm. After finished, tighten all screws (FIG.11).
- 10 -
