Pitney Bowes dm300m series Скачать руководство пользователя страница 98

Страница: 98 / 176

8-2

SDC2036A

8 • Troubleshooting

Power Problems (nothing displays)

1. Is power cord plugged into both mailing machine base and wall

outlet? Make sure the power cord is not connected to a switched

wall outlet with the outlet turned off.

2. Check the Power Switch is On.
3. Check power lamp on the machine. If it is on, power is reaching

the machine.

4. Machine may be in sleep mode. Press any key to wake it.

Getting Help

There may be times when you need help to solve a problem, or you

may want more information about how your

DM300M/DM400M/

DM475M Series

works.

lease read the troubleshooting information

in this section first. In many cases, it can help you resolve the

problem.
If you need to contact us, please have the following information at

hand:
• Product Model:

DM300M/DM400M/DM475M Series

• Serial number: See the back of the

DM300M/DM400M/DM475M

Series

• Nature of problem: What happens and when does it happen?

Did the

DM300M/DM400M/DM475M Series

display an error

message?

• The steps you've already taken to solve the problem and the

results.

Details of how to contact your machine supplier will be either in a

separate document supplied with your

DM300M/DM400M/DM475M

Series, on the back cover of this guide, or on a sticker applied to

your DM300M/DM400M/DM475M Series.

IMPORTANT INFORMATION

The

DM300M/DM400M/DM475M Series

has been approved for

use in the UK by Royal Mail. Under the terms of your licence you

are not allowed to tamper with or modify the machine in any way.

Содержание dm300m series

















































































































































































Результаты поиска

Содержание dm300m series

Отзывы:

Бренды по названию

Популярные бренды

Pitney Bowes dm300m series, Руководство оператора

Результаты поиска

Содержание dm300m series

Отзывы:

Бренды по названию

Популярные бренды