Pitney Bowes dm300m series Скачать руководство пользователя страница 65

Страница: 65 / 176

5-7

SDC2036A

5 • Adding Postage/Connecting to Data Centre

Printing a Funds (Postage) Report

A funds report allows you to print a record of how much postage has

been used and how much is remaining in the machine.
1. Press

Funds

2. Press

Options

and select "Print Funds Report"

3. When prompted either:

• Manually feed an envelope (DM300M): Place the envelope

up against the back wall of the system and slide it to the right

until the system grasps it.

• Automatically feed an envelope (DM400M/DM475M): Load

envelope onto the feeder and press

Start

• Press the

Tape

key.

The funds report is printed and the envelope/tape is ejected.
4. Select "No" to return to Home screen.

Downloads from the Data Centre to your system

When you connect to the Data Centre to add postage or perform

other transactions, the Data Centre may perform the following:
•  Download required software updates to your machine.
•  Download Envelope Messaging you ordered.
•  Perform a remote audit of your machine as required by the

Postal Authority.

• Download new postal rates.
Generally speaking, downloads are considered either mandatory

(you must do them at the time you are prompted to on the screen),

or non-mandatory (you may decide to download at a later time).

However, even non-mandatory downloads can become mandatory if

you wait too long to do the download.
Once a download is finished, you will either be prompted to select

“Restart Now” to restart the machine or select “Continue” to return

you to the screen that you started from, depending on the type of

download performed.
A description of the type of downloads that can occur in your

machine are presented on the following pages.

Содержание dm300m series

















































































































































































Результаты поиска

Содержание dm300m series

Отзывы:

Бренды по названию

Популярные бренды

Pitney Bowes dm300m series, Руководство оператора

Результаты поиска

Содержание dm300m series

Отзывы:

Бренды по названию

Популярные бренды