Pitney Bowes dm300m series Скачать руководство пользователя страница 132

Страница: 132 / 176

12-4

SDC2036A

12 • Inview/ Budget Manager Accounting

Introduction

INVIEW and Budget Manager are packages which provide extended

accounting features. Budget Manager offers additional features over

the INVIEW package.
Use of INVIEW requires fitting a kit that is supplied with your system.

Details of fitting the INVIEW kit are available on the web. Go to

www.europe.pb.com/docs

and enter the access code

9691

Budget Manager is a purchasable option. Contact your machine

supplier for more information.
INVIEW or Budget Manager is enabled and controlled through the

normal system menus as described in this chapter. Both packages

use an external memory module which is connected to your system

via one of the USB ports.

Please note:

INVIEW can also be referred to, in some instances as

Budget Manager Lite.

Turning INVIEW/ Budget Manager On

If you have purchased the INVIEW/ Budget Manager Accounting

option, follow the steps below to turn on the feature.
1. At the home screen, press

Options

2. Select "Accounts".
3. If the supervisor password is enabled, you will be prompted to

enter it and select “OK” to continue.

4. When prompted, select “Acct Type: .....”.
5. Select “INVIEW/ Budget Manager”. After a few seconds, the

INVIEW/ Budget Manager main menu will display.

Turning INVIEW/ Budget Manager Off

You can temporarily turn off INVIEW/ Budget Manager Accounting

whenever you wish.

NOTE:

You will not be tracking postage by account when this

feature is turned off.

1. Press

Options

2. Select “Accts”

3. If the supervisor password is enabled, you will be prompted to

enter it and select “OK” to continue.

4. Select “Account Type: INVIEW/ Budget Manager”.

Содержание dm300m series

















































































































































































Результаты поиска

Содержание dm300m series

Отзывы:

Бренды по названию

Популярные бренды

Pitney Bowes dm300m series, Руководство оператора

Результаты поиска

Содержание dm300m series

Отзывы:

Бренды по названию

Популярные бренды