Pitney Bowes dm300m series, Руководство оператора

Страница: 78 / 176

6-10 SDC2036A
6 • System Options
Setting Weight Change Options
You can set how the scale reacts regarding the class of service when
the weight changes.
1. Press
Weigh/Rate .
2. Press Page Down .
3. Select "Change/Retain Class".
4. Select “Retain Class” when weight changes. The current
condition is displayed on the screen.
5. Toggle “Yes” if you want the system to retain the class when the
weight changes. Toggle “No” if you do not want the system to
retain the class when the weight changes.
4. Press Enter to return to the Home screen.
Current WOW Weight Limit (DM475M only)
You may set the maximum limit to the WOW weight capacity. This
will stop the WOW from weighing items above the set weight.
1. Press
Weigh/Rate , then select Page Down three times.
2. Select ‘WOW Wt Limit’
3. Enter the Maximum weight and select ‘Confirm’.
To revert to the maximum weight, select ‘Return to Maximum’.
WOW Start Key Options (DM475M only)
This sets the action the machine takes if a WOW operation is
interrupted for a scale operation during use.
1. Press
Weigh/Rate , then select Page Down three times.
2. Select ‘WOW Start Key: Re-WOW’.
3. Select ‘Revert to WOW’, if you require the machine to continue
with WOW operation OR select ‘Keep Current Scale Mode’.
Setting the Scale Location Code
1. Press Weigh/Rate .
2. Press Page Down three times.
3. Select "Scale Location Code".
4. Enter the location code (from 1 - 31) and select "OK". Refer to
the Self Install Guide supplied with your system to determine the
location code for your scale/location.
5. Press Home to return to the Home screen.