manualshive.com logo in svg

Pitney Bowes dm300m series, Руководство оператора

Поделиться
Скачать
Pitney Bowes dm300m series Скачать руководство пользователя страница 124

11-6 

 SDC2036A

11 • Departmental (Standard) Accounting

Turning On Account Passwords 

You can turn on the requirement for all operators to enter passwords 

(if passwords are set up) when choosing an account. 

NOTE:

 The Supervisor Password must be turned on before you 

can use this feature. If it is turned on, you will be presented with an 

option to enter the Supervisor Password.

1.  Press 

Options

.

2.  Select “Accounts".
3.  If the supervisor password is enabled, you will be prompted to 

enter it and select “OK” to continue.

4.  Press 

Page Down

 and select “Accounting Password: OFF”. The 

display will change to “Accounting Password: ON”.

5.  Press 

Home

 to return to the home screen.

Turning Off Account Passwords

You can turn off the requirement for all operators to enter passwords 

(if passwords are set up) when choosing an account.
1.  Press 

Options

.

2.  Select “Accounts".
3.  If the supervisor password is enabled, you will be prompted to 

enter it and select “Continue” to continue.

4.  Press 

Page Down

 and select “Accounting Password: ON”. The 

display will change to “Accounting Password: OFF”.

5.  Press 

Home

 to return to the home screen.

Содержание dm300m series

















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды