P.RG F4202N
© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
Parental Control Section
HBK 939800036-A1
67
3.
Enter a name and a description for the new policy.
4.
Select the content filtering check boxes, which represent content you would
like to block. Selecting a category will automatically select all its sub-
categories and vice versa. If you would like to make a more refined selec-
tion of filtering options, click the plus sign (+) next to each category to dis-
play a list of its sub-categories. Note that clicking the minus sign (-) of a
category will only be possible if all its sub-categories are either checked or
unchecked.
5.
You can also manually specify a list of Web sites and a list of URL key-
words in the provided text fields, to which you can either block or allow ac-
cess using the corresponding drop-down menu.
6.
Click 'OK' to save the settings.
Once you have created different filtering policies, you can either define a default
policy that will be applied to all of your LAN computers, or apply different poli-
cies to individual computers separately:
LAN Filtering Policy – To select a default filtering policy for the LAN, select
the policy name from the 'Default Filtering Policy' drop-down menu located
in the 'Filtering Policy' screen, and click Apply.
PC Filtering Policy – To apply separate policies to individual home com-
puters, perform the following:
1.
In the 'Filtering Policy' screen (see
Figure 7.318
), click the 'Add a LAN
Computer' link.
2.
Enter the name or IP address of the LAN computer to which you wish to
apply a policy.
3.
Select the policy you wish to apply in the 'Policy' drop-down menu.
4.
By default, the rule will always be active. However, you can configure
scheduler rules by selecting 'User Defined', in order to define time seg-
ments during which the rule may be active. After more than one sched-
uler rule is defined, the 'Schedule' drop-down menu will allow you to
choose between the available rules.
5.
Back in the 'Filtering Policy' screen, use the check box next to the com-
puter name in order to enable or disable its policy.
6.
Click 'OK' to save the settings.
