P.RG F4202N
© (2010) Pirelli Broadband Solutions S.p.A. All Rights Reserved. Proprietary Use Pursuant to Cover Page Instructions.
128
HBK 939800036-A1
Advanced Section
Log Requests
Select this check box to log connection requests sent to
your Web server.
HTTP Port
The port your Web server uses for HTTP traffic.
HTTPS Port
The port your Web server uses for HTTPS traffic.
Data Allocation
Enter the file system path of the P.RG F4202N folder
containing your Web site's content.
Each user on the LAN can configure a private Web page, which can be reached
by browsing to http://openrg.home/~<username>. This path will be mapped to a
sub directory of the users' home directory on P.RG F4202N.To set a private Web
page:
1. Verify that the 'User Home Directory' option is enabled in the user's account
settings screen (for more information, refer to
Section 6.3.1
).
2. In the 'User Private Web Page' section of the 'Web Server' screen, select
the 'Enabled' check box.
3. In the 'Data Location' field, enter the user's sub directory containing the Web
site's content.
4. Click OK to save the settings
You can configure any number of additional Web sites on the P.RG F4202N
Web server. Each of these sites will appear to the Internet user as if they are
located on separate hosts. This method is referred to as
Virtual Hosts
. In
addition, you can add any number of aliases to each virtual host. Browsers from
within the LAN will reach your Web sites directly. However, to provide external
access to your sites, you will have to register domain names. These domain
names must be mapped to P.RG F4202N WAN IP address by the DNS. To
configure additional Web sites:
1. In the 'Virtual Hosts' section of the 'Web server' screen, click the 'New
Entry' link.
2. In the 'Server Name' field, type the Web site's domain name.
3. In the 'Data Location' field, type the file system path to the P.RG
F4202N folder containing the Web site's content.
4. To add an alias to the virtual host, click the 'New Entry' link in the
'Aliases' section.
5. Type an alias URL in the 'Alias' field, and click 'OK'. The new alias
appears under the 'Aliases' section