Pipistrel Virus SW 121, Руководство по эксплуатации для пилотов

Страница: 182 / 226

8-12
PAGE
Virus SW 121
Pilot Operating Handbook
POH-121-00-40-001
PAGE REV. 0
SECTION 8
HANDLING AND SERVICING
1 Place a large pan under the engine to catch waste.
2 Remove induction air filter and seal off induction system inlet.
3
With the engine cowling removed, spray or brush the engine with
solvent or a mixture of solvent and degreaser. In order to remove
especially heavy dirt and grease deposits, it may be necessary to
brush areas that were sprayed.
CAUTION:
Do not spray solvent into the alternator, starter, or induction air
intakes.
8.7.2. CLEANING INTERIOR SURFACES
Windshield and Windows
Never rub dry lexan. Do not attempt to polish lexan.
CAUTION:
Clean lexan windows with a solvent free, none abrasive, anti-
static acrylic cleaner. Do not use gasoline, alcohol, benzene, carbon tetra-
chloride, thinner, acetone, or glass window cleaning sprays. Use only a non-
abrasive cotton cloth or genuine chamois to clean acrylic windows. Paper
towel or newspaper are highly abrasive and will cause hairline scratches.
NOTE: Wiping with a circular motion can cause glare rings. Use an up and
down wiping motion to prevent this. To prevent scratching from dirt that has
accumulated on the cloth, fold cloth to expose a clean area after each pass.
1 Wipe the windows clean with a moist cloth or chamois.
2 Dry the windows using a dry nonabrasive cotton cloth or chamois.
Instrument Panel and Electronic Display Screens
The instrument panel, control knobs, and plastic trim need only to be wiped
clean with a soft damp cloth. The multifunction display, primary flight display,
and other electronic display screens should be cleaned with LCD Screen
Cleaning Solution.