Using the MULTI-ZONE feature
07
47
En
English
Français
Deutsch
Nederlands
Italiano
Español
Using the MULTI-ZONE controls
The following steps use the front panel controls
to select sources. See
MULTI-ZONE remote
controls
below.
1
Press the MULTI-ZONE ON/OFF button
on the front panel.
Each press selects a MULTI-ZONE option:
•
ZONE 2 ON
– Switches the MULTI-ZONE
feature on
•
ZONE 2 OFF
– Switches the MULTI-ZONE
feature off
The
ZONE
indicator lights when the MULTI-
ZONE control has been switched ON.
2
Press CONTROL.
• When the receiver is on,
1
make sure that
any operations for the sub zone are done
while
ZONE 2
shows in the display. If this is
not showing, the front panel controls affect
the main zone only.
3
Use the INPUT SELECTOR dial to select
the source for the zone you have selected.
For example,
Z2
:
CDR
sends the source
connected to the
CDR
inputs to the sub room
(
ZONE 2
).
• If you select
TUNER
, you can use the tuner
controls to select a preset station (see
Saving station presets
on page 48 if you’re
unsure how to do this).
2
If you select
SIRIUS, you can only switch between
PRESET modes.
4
When you’re finished, press CONTROL
again to return to the main zone controls.
You can also press the
MULTI-ZONE ON/OFF
button on the front panel to switch off all
output to the sub zone.
3
MULTI-ZONE remote controls
Press the
RECEIVER
button on the remote
control, then with the
SHIFT
button pressed,
press the buttons below to operate the
corresponding zone.
The following table shows the possible MULTI-
ZONE remote controls:
a.
Without pressing the
SHIFT
button, you can
switch power on/off in the sub zone.
Note
1 If the receiver is in standby, the display is dimmed, and
ZONE2 ON
continues to show in the display.
VIDEO INPUT
R
L
AUDIO
VIDEO
iPod
USB
BAND
PHONES
INPUT
SELECTOR
STANDBY/ON
PHASE
CONTROL
AUTO SURROUND/
STREAM DIRECT
STEREO/
A.L.C.
ADVANCED
SURROUND
STANDARD
SURROUND
MASTER
VOLUME
SPEAKERS
CONTROL
MULTI-ZONE
ON/OFF
PORTABLE
TUNER EDIT
ENTER
AUDIO / VIDEO MULTI- CHANNEL RECEIVER
VSX–819H
TUNE
–
TUNE
+
PRESET
–
PRESET
+
CONTROL
MULTI-ZONE
ON/OFF
CONTROL
MULTI-ZONE
ON/OFF
SPEAKERS
2 The tuner cannot be tuned to more than one station at a time. Therefore, changing the station in one zone also changes the
station in the other zone. Please be careful not to change stations when recording a radio broadcast.
3 • You won’t be able to switch the main zone off completely unless you’ve switched off the MULTI-ZONE control first.
• If you don’t plan to use the MULTI-ZONE feature for a while, turn off the power in both the sub and main rooms so that this
receiver is in standby.
• Volume level cannot be adjusted with this receiver. Use the separate amplifier connected to the
ZONE2 OUT
to adjust the
volume.
Button
What it does
ZONE 2
ON/OFF
a
Switches on/off power in the sub zone.
INPUT
SELECT
Use to select the input source in the
sub zone.
MULTI
CONTROL
buttons
Use to select the input source directly
in the sub zone.
VSX-819H_KU.book Page 47 Thursday, December 25, 2008 8:36 AM
