Pioneer PDP4350SX, Руководство по эксплуатации

Страница: 14 / 180

06 Preparation
14
En
Routing cables
Speed clamps and bead bands are supplied for bunching cables. Once properly bunched, follow the steps below to route the
cables.
When the speakers are installed on the sides
(rear view)
Speaker cable
Attaching speed clamps to the main unit
Attach the speed clamps using any of the 5 holes you prefer
marked with below, depending on your routing system.
Attaching and removing speed clamps
Insert [1] into an appropriate hole on the rear of the Plasma
Display and snap [2] into the back of [1] to lock the clamp.
Speed clamps are designed to be difficult to undo once in
place. Please attach them carefully.
Use pliers to twist the clamp 90°, pulling outward. The clamp
may deteriorate over time and become damaged if removed.
2
1
Speaker cable
Speed clamps
Bead band
Bunching and securing cables with the bead bands.
Do not allow excessive stress to be placed on the ends of
cables.
06-PDP5050SX-Eng (14-19) 05.2.25, 0:14 PM 14