Pioneer PDP 503CMX Скачать руководство пользователя страница 68

Страница: 68 / 192

How to use the standard mounting components

4.1 Standard Mounting Components Features and Characteristics

In addition to reliability and the vivid display resulting from its large screen area, brightness, and image quality, the

plasma display (PDP-503CMX/PDP-503MXE and PDP-433CMX/PDP-433MXE) is thin and lightweight, enabling mounting

in locations not possible for conventional displays.

We considered various mounting patterns and operating conditions during the design of the plasma display (PDP-

503CMX/PDP-503MXE and PDP-433CMX/PDP-433MXE). A wide range of standard mounting hardware is available for

easy mounting.

Video card: PDA-5002

This is the video card needed for video input and RGB input. This product has three input systems: the component

1 system, S input 1 system, and the digital RGB input 1 system. And the component input and S input are compatible

with various audio inputs, and have a wide range of uses including visual display and visual performance.

Table-top Stand: PDK-TS01

This on-board support designed for the plasma display enables vertical placement of the unit.

Tiltable wall-mount Hardware: PDK-5011

Permits tilting of the display downward from the horizontal by up to 25 degrees. Mount depth is 143 mm or less(in

vertical position, without optional speaker). This hardware permits a wide range of viewing angles.

Tiltable wall-mount Hardware: PDK-5013

Distance from the rear surface of the plasma display to the wall is 32 mm.

It is provided with many installation holes for various hypothetical walls and it is constructed so that it can be easily

attached to the main unit.

Plasma Display Ceiling Suspension Hardware: PDK-5012

Simple rod-type mounting hardware permitting display panning over a range of 45 degrees, and up to 25-degree

downward tilting from the horizontal. This hardware enables installation of the unit in a wide range of locations.

Mobile Cart: PDK-5014

This is an extremely stable movable stand that one person can use to freely move the plasma display.

It can also be used to adjust the screen height and the screen angle of tilt to match the line of sight according to its

use.

PDP Bracket: PDK-5005 (Can be used only with the PDP-503CMX/PDP-503MXE)

Can be used as a handle when moving the unit, or as a frame when wire-suspending it or hanging it on the wall. Most

suitable for temporary use when quick, easy, and safe attachment is necessary.

Cable cover: PDA-P01

It completely conceals the complex cable arrangements to present a neat external appearance.

Speaker system: PDP-S05-LR (Can be used only with the PDP-503CMX/PDP-503MXE)

PDP-S07-LR (Can be used only with the PDP-433CMX/PDP-433MXE)

This vertical twin-speaker system, with a newly developed elliptical unit 4.5 cm wide on top and bottom with a 2.5-

cm dome cone tweeter in between, provides improved sound-field localization. Despite its compact 7.4-cm cabinet,

the speaker system is capable of offering powerful dynamic sound reproduction. (Note that when the speaker is

mounted to the main unit itself, the operation panel of the main unit is inaccessible.)

[503CMX/503MXE : 433CMX/433MXE]

Содержание PDP 503CMX

































































































































































































Результаты поиска

Содержание PDP 503CMX

Отзывы:

Похожие инструкции для PDP 503CMX

Бренды по названию

Популярные бренды

Pioneer PDP 503CMX, Техническое руководство

Результаты поиска

Содержание PDP 503CMX

Отзывы:

Похожие инструкции для PDP 503CMX

Бренды по названию

Популярные бренды