3
Table of Contents
CAUTION
• To prevent injury and material damage, thoroughly read
this manual and all labels found on the equipment before
attempting to mount, install, move, or adjust the product.
• Do not install the unit outside or in the open air. Doing
so will lead to water seepage into the system, resulting
in fire or electric shock.
• Be especially careful when working around parts of the
system that have sharp edges.
• When performing installation work from a height, take
suitable precautions to guard against falling. Set up a
barrier around the work site to prevent accidentally
dropped objects from injuring persons standing or
walking below.
• Keep all foreign objects out of the unit. Do not tamper
with the unit, or fire or electric shock may result.
• Observe the following operating environmental
limitations:
Temperature: 0 to 40°C
Humidity: 20 to 80%
• Install the unit only in properly ventilated areas.
4)
Reducing digital noise ............................... 138
5)
Setting HIGH CONTRAST ......................... 139
6)
Setting PURECINEMA .............................. 140
7)
Setting the color system ........................... 140
8)
Setting the clamp position ........................ 142
9)
Setting 3D Y/C separation ......................... 143
10) Settings for peripheral equipment ............. 144
11) Setting the input signal format .................. 145
12) Setting the power control ......................... 146
13) Setting automatic input switching ............. 147
14) Setting audio output .................................. 147
5.4 Integrator Mode ......................................................... 148
5.4.1 About the integrator mode .............................. 148
5.4.2 Example of integrator mode operation ............ 149
5.4.3 Adjustments and settings in integrator mode ... 151
1)
Adjusting PICTURE (picture quality) .......... 151
2)
Adjusting WHITE BALANCE ..................... 152
3)
Adjusting SCREEN (screen position) ......... 152
4)
Setting the 4-screen display (2x2 mode) ... 153
5)
Setting brightness enhancement
at screen center ........................................ 154
6)
Setting the HDTV MODE .......................... 155
7)
Setting component input ........................... 156
8)
Adjusting SUB VOLUME ........................... 157
9)
Setting the OSD display ............................ 159
10) Setting the baud rate ................................. 160
11) Setting OFF TIMER ................................... 161
12) Setting FULL MASK .................................. 162
13) Adjusting SIDE MASK ............................... 163
14) Setting MASK CONTROL .......................... 164
15) Setting ORBITER MODE ........................... 164
16) Setting INVERSE MODE
(negative-positive inversion) ...................... 165
17) Setting COLOR MODE ............................. 166
18) Setting MIRROR MODE ........................... 167
19) Setting the cooling fan control formula ..... 168
20) Assigning a name to the monitor .............. 169
21) Assigning an ID ......................................... 170
22) Input settings when using a video card
other than the PDA-5002 .......................... 170
23) Simple checking of internal temperature .. 171
24) Checking the accumulated ON time ......... 171
5.4.4 PICTURE and WHITE BALANCE adjustment
values memory area tables .............................. 172
5.4.5 SCREEN adjustment values area tables .......... 174
5.5 RS-232C Adjustment Mode ....................................... 176
5.5.1 About the RS-232C adjustment mode ............. 176
5.5.2 Interface .......................................................... 177
5.5.3 ID assignment ................................................. 179
5.5.4 List of RS-232C commands ............................. 180
5.5.5 GET commands ............................................... 183
5.6 Combination Connection ........................................... 186
5.6.1 Connections ..................................................... 186
5.7 KEY LOCK/UNLOCK .................................................. 188
5.7.1 Functions ......................................................... 188
5.7.2 How to switch KEY LOCK/UNLOCK ................ 188
5.8 Regarding the problem of images becoming
burnt onto the screen ................................................ 189
5.9 Cautions on connecting camera images .................... 190
OPERATING PRECAUTIONS AND RECOMMENDATIONS
6.1 Operating Precautions and recommendations .......... 191
MAINTENANCE AND CLEANING ..................................... 192
Содержание PDP 503CMX
Страница 19: ...19 Remote Control Unit Holder ...
Страница 103: ...103 Mobile Cart PDK 5014 503CMX 503MXE 433CMX 433MXE ...
