Pioneer PDP 503CMX Скачать руководство пользователя страница 119

Страница: 119 / 192

119

Before Beginning Adjustments

Integrator Mode

This mode provides adjustment functions for the integrator.

White balance adjustment and various other settings are available in addition to those in the Menu mode. Refer to

5.4, “Integrator Mode” for further details.

RS-232C Adjustment Mode

This mode enables various adjustments and settings using a PC.

Some adjustment items are available only in this mode.

Refer to 5.5, “RS-232C Adjustment Mode”, for further details.

5.1.2 Combination use of remote control unit, operating panel and PC

• The remote control and the operating panel of the main unit may be used together.

(Example) You can enter the Menu mode through the operating panel of the main unit, then make adjustments

using the remote.

• Depending on which has transmitted the more recent command, either the remote, the operating panel of the main

unit, or the RS-232C may originate the command currently in effect.

(Example)

Operation

Action

Press the MENU button on the remote control

Enters Menu mode.

(or on the operating panel of the main unit).

At this time, the only available

RS-232C commands are:

• <AJY>

• <POF>

Now, issue an <AJY> command from a PC.

Menu mode is disabled, and RS-232C

adjustment mode is activated.

At this time, only the following options are

available from the remote control (or the

operating panel of the main unit):

• Power switch

• MENU button

• KEY LOCK/UNLOCK button

(NOTE) The remote does not have a KEY LOCK/

UNLOCK button.

CAUTION

When adjustment/setting has been made under this mode, enter ID first before other any

other actions.

Содержание PDP 503CMX

































































































































































































Результаты поиска

Содержание PDP 503CMX

Отзывы:

Похожие инструкции для PDP 503CMX

Бренды по названию

Популярные бренды

Pioneer PDP 503CMX, Техническое руководство

Результаты поиска

Содержание PDP 503CMX

Отзывы:

Похожие инструкции для PDP 503CMX

Бренды по названию

Популярные бренды