instabus EIB
Technical Product Information
April 2006
Touch panel UP 588
5WG1 588-2AB01
Touch panel UP 588/11
5WG1 588-2AB11
Touch panel UP 588/21
5WG1 588-2AB21
Accessories: Design frame, anodised aluminium
5WG1 588-8AB01
Siemens AG
UP 588, 6 pages
Technical Manual
Automation and Drives Group
Electrical Installation Technology
©
Siemens AG 2006
Update: http://www.siemens.de/gamma
P.O.Box 10 09 53, D-93009 Regensburg
Subject to change without prior notice
2.3.1.4/1
Product and Applications Description
The touch panel UP 588 is a multifunctional dis-
play/control unit for the EIB. The basis of the device is an
LC display with a resolution of 320 x 240 pixels and an
integrated, resistive matrix with 6 x 10 fields. The dis-
play has backlighting available, which is activated dur-
ing operation and can be switched off automatically
after an adjustable period.
•
Touch-Panel UP 588
5WG1 588-2AB01
backlighting green
AC 230V
•
Touch-Panel UP 588/11
5WG1 588-2AB11
backlighting white
AC 230V
•
Touch-Panel UP 588/21
5WG1 588-2AB21
backlighting white
AC / DC 24V
In connection with the associated application program,
the display unit can be used for the following functions:
the display and operation of up to 70 EIB standard func-
tions on 7 display pages, the display of an alarm page
with 4 alarm signals and 2 text messages as well as the
execution of time-controlled tasks.
The following accessories are required for the touch
panel:
Design frame, aluminium 5WG1 588-8AB01
Application Programs
01 07 Touch-Panel vision 802103
•
display and operation of up to 70 EIB standard
functions on 7 display pages
•
display of an alarm page with 4 alarm signals and
2 text messages
•
execution of time-controlled tasks
•
8 scene with 10 communication objects are possible
•
display of date and time
Installation instructions
•
The device can be used for permanent interior instal-
lations in dry rooms and for insertion in flush-type
boxes.
Diagram 1:
drilling jig for cavity wall box for Touch
panel UP 588
V
WARNING
•
The device may only be installed and commissioned
by an authorised electrician.
•
The device may only be used in connection with the
named accessories, in particular the flush-type box.
•
230V devices which are not included with supply may
not be inserted in the flush-type box. It is also not
possible to loop through 230V cables.
•
The prevailing safety and accident regulations should
be observed.
•
The power supply voltage may only be connected to
the supply if the device has been fully installed.
•
Electrical isolation should be ensured between the
bus cable and the 230V power supply.
•
For planning and construction of electric installations,
the relevant guidelines, regulations and standards of
the respective country are to be considered.
