Pioneer PDA-4001 Скачать руководство пользователя страница 107

Страница: 107 / 136

107

<Ver. 2.1>

3) Integrator mode

This mode offers an adjustment function for the integrator. This mode consists of various menu mode items and

additional settings for white-balance adjustment and various modes.

This mode may be entered only when powering on, within 3 seconds after the menu button is pressed.

When you enter Integrator mode, all data adjusted in Menu mode automatically returns to reset values (center

values), except for CLK. PHS.

Each of the adjustment modes is selected through the following buttons. This is common to all Integrator adjustment

modes.

(1) MENU button

Remote control : Restores normal operations mode from any screen in Menu mode.

Main body

: Restores normal operations mode from any screen in Menu mode.

(2) SET button

Remote control : Returns to the previously selected items in the menu and hierarchy.

Main body

: Returns to the previously selected items in the menu and hierarchy.

(3) UP/DOWN buttons

Remote control : Selects menu items.

Main body

: None

(4) LEFT/RIGHT buttons

Remote control : Adjusts each item and selects settings for each item.

Main body

: None

(5) +, – buttons

Remote control : None

Main body

: Adjusts each item and selects settings for each item.

In Integrator mode, the following buttons are accepted, in addition to the buttons above.

(6) STANDBY/ON buttons

Remote control : Exits Integrator mode and turns off power. Adjusted data is saved as the latest data in the

memory.

Main body

: Exits Integrator mode and turns off power. Adjusted data is saved as the latest data in the

memory.

(7) “AJY” and “POF” commands from the RS232C command set

“AJY” command : Exits Integrator mode and invokes RS232C command adjustment mode. Adjusted data is

saved as last memory.

“POF” command : Exits Integrator mode and turns off power. Adjusted data is saved as the latest data in the

memory.

4) RS232C adjustment mode

This mode is used to adjust quality, white balance, phase adjustment, and mode setting in personal control.

Some items are accessible only through this mode.

For details, see the description of 5.3 Outer control by RS232C in this manual.

Caution:

• When you enter Integrator and RS232C adjustment mode, all data adjusted in Menu mode (see the instruction

manual) take on center values, except for CLK.PHS.

• The adjusted values of CLK.PHS. are common to Menu mode, Integrator mode, and RS232C adjustment mode.

Before making adjustments

Содержание PDA-4001









































































































































Результаты поиска

Содержание PDA-4001

Отзывы:

Похожие инструкции для PDA-4001

Бренды по названию

Популярные бренды

Pioneer PDA-4001, Техническое руководство

Результаты поиска

Содержание PDA-4001

Отзывы:

Похожие инструкции для PDA-4001

Бренды по названию

Популярные бренды