Pioneer PDA-4001, Техническое руководство

Страница: 125 / 136

125
<Ver. 2.1>
14) Initial reset setting mode (total adjustment)
This function restores adjusted values for PICTURE PARAMETER and WHITE BALANCE to factory-preset values,
which are within the range of values currently held in the selected memory area. Selecting “YES” with the remote
control
2
button or operation panel + button restores factory-preset values. Selecting “NO” with the remote control
3
button or operation panel – button restores the current state. Select the following:
“YES” to restore factory-preset values
“NO” to avoid restoring factory-preset values
and press the SET button.
In either case, you are returned to the above adjustment mode when selection is complete.
5.2.3 Precautions
• Input cannot be switched over in Menu or Integrator modes.
First select the input to adjust, then move to Menu mode or Integrator mode.
• The system automatically exits Menu mode or Integrator mode if one of the following occurs:
a) The main switch is turned off (AC OFF).
b) STANDBY status is invoked.
c) A non-operational period persists for approx. 180 seconds.
d) The KEY-LOCK button of the main body is pressed.
e) Input signals are externally switched-over, or a no-signal state arises.
f) The system is switched to RS232C adjustment mode with an <AJY> command.
g) The protective circuit (P.D.) is activated.
Note: For a) and g), only the item currently being adjusted is not placed in latest data in the memory.
Performing adjustments on the plasma display operation panel
and remote control
Y E S N O
I N I T I A L I Z E ?
T
T O
I N
L A
A
I I T L
Z
I E
D
A D
I O
T I
L
N A E T U P S
P I C T U R E
W H I T E B A N C E L A
P A R A M E T E R