Pioneer PDA-4001, Техническое руководство

Страница: 104 / 136

104
<Ver. 2.1>
When the wall hanging metal fixture is mounted to the plasma display with the optional speaker, use the monitor
mounting bolt, and the hexagonal socket head button bolt and
φ
15-mm washer supplied with the optional speaker to
tighten the speaker, as indicated in Fig. 4. Next, as shown in Fig. 5, use the monitor mounting bolts not used to fix the
speaker at the top to tighten through the
φ
25-mm washers supplied with the optional speaker.
Follow the usual steps for mounting the wall hanging metal fixture.
After the optional speaker is mounted, it will be difficult to see the monitor-mounting bolt attaching section on the wall
hanging metal fixture side and the angle setting screw section. Take appropriate precautions when mounting the
optional speaker.
Mounting standard metal fixtures
(Precautions for installing the optional speaker)
3) Wall-hanging metal fixture (PDK-4006)
Fig. 4
Washer of
φ
15-mm outer diameter
(supplied with the optional speaker)
Hexagonal socket head
button bolt
(supplied with the
optional speaker)
Monitor mounting bolt
(supplied with the PDK-4006)
Hole rivet