Listening to the radio
1
2
4
3
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1
Band indicator
Shows which band the radio is tuned to, AM
or FM.
2
Frequency indicator
Shows to which frequency the tuner is
tuned.
3
Stereo (
5
) indicator
Shows that the frequency selected is being
broadcast in stereo.
4
Preset number indicator
Shows what preset has been selected.
1 Press SOURCE to select the tuner.
Press
SOURCE
until you see
TUNER
dis-
played.
2 Press BAND to select a band.
Press
BAND
until the desired band is dis-
played,
F1
,
F2
,
F3
for FM or
AM
.
3 To perform manual tuning, press
m
or
n
with quick presses.
The frequencies move up or down step by
step.
4 To perform seek tuning, press and hold
m
or
n
for about one second and re-
lease.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by pressing either
m
or
n
with a quick press.
#
If you press and hold
m
or
n
you can skip
broadcasting stations. Seek tuning starts as soon
as you release the buttons.
Note
When the frequency selected is being broadcast
in stereo the stereo (
5
) indicator will light.
Tuner
En
19
English
Section
05