Using the dual mono mode
When playing a disc recorded on a dual mono
mode, you can select the channel to output.
!
This function is effective only on dual mono
mode sound.
1 Press A to select DMONO.
Press
A
until
DMONO
appears in the display.
#
When playing other than the DVD disc, you
cannot switch this mode.
2 Press
m
or
n
to select the desired
output setting.
Each press of
m
or
n
selects output set-
ting in the following order:
L+R
(left and right channels)
L
(left channel)
R
(right channel)
Using the direct control
You can override audio settings to check for ef-
fectiveness of your audio settings.
1 Press A to select DIRECT.
Press
A
until
DIRECT
appears in the display.
2 Press
r
to turn the direct control on.
DIRECT:ON
appears in the display. Direct con-
trol is now on.
#
To turn direct control off, press
q
.
Notes
!
All audio functions are locked out during
DIRECT:ON
except
VOLUME
.
!
If the source is a 2-channel LPCM audio or a
2-channel Dolby Digital audio and you select
DIRECT:ON
, audio is heared only over front
left/right speakers.
Using the Dolby Pro Logic
Dolby Pro Logic gives enhanced spatial and di-
rectional effects, creating theater-like sense of
presence and ambience.
!
If the source is a 2-channel LPCM audio or
a 2-channel Dolby Digital audio and you se-
lect SFC effects that are most applicable
for 5.1-channel audio (i.e.,
MUSICAL
,
DRAMA
or
ACTION
), we recommend turn-
ing Dolby Pro Logic on. On the other hand,
when selecting SFC effects that are in-
tended for use with 2-channel audio (i.e.,
JAZZ
,
HALL
or
CLUB
), we recommend turn-
ing Dolby Pro Logic off.
1 Press A to select PL.
Press
A
until
PL
appears in the display.
2 Press
r
to turn the Dolby Pro Logic
on.
PL :ON
appears in the display. Dolby Pro Logic
is now on.
#
To turn Dolby Pro Logic off, press
q
.
Note
When playing a 2-channel mono source with Pro
Logic turned on, there may be occasions when
the following will occur:
!
No audio is output if the center speaker set-
ting is
SML
or
LRG
and no center speaker is
installed.
!
Audio is heard only over the center speaker if
installed and the center speaker setting is
SML
or
LRG
.
Digital Signal Processor
En
64
Section
12