2.4.2 Specific Switch Settings
SWITCH 1
This switch bank is set through the
Function Switch Setting Mode
and the settings
are stored in Register C.
This switch sets the following player operating characteristics:
The default settings of the above bits are 0 (reset).
Bit 0: When this bit is set to ON, the player repeats playing the disc from the
beginning to the end. When set to OFF, the player automatically Parks the
disc after one side is played.
Bit 1: When this bit is set to ON, the player starts to play a disc if one is loaded.
Bit 2: When this bit is set to ON, the player starts to play a disc once power is
turned on and if a disc is loaded.
Bit 3: This bit is not used; set to 0.
Bit 4: This bit is used to select the background color for squelch screens. ON
selects Black, OFF selects Blue.
Bit 5: This bit is not used; set to 0.
Bit 6: This bit is not used; set to 0.
Bit 7: When this bit is set to ON,
Test Mode
is enabled.
Test Mode
is used for
servicing the player and should always be set to OFF for normal operation.
Chapter Two • LD-V8000 Level I & III
2-18
TP 113 v. 2.0 • 2/93
LD-V8000 Level I & III User’s Manual
Function
On (=1)
Off (=0)
0
Side Repeat
On
Off
1
Load Start
On
Off
2
Power On Start
On
Off
3
Not Used
Off
4
Back Color Select
Black
Blue
5
Not Used
Off
6
Not Used
Off
7
Test Mode
On
Off
Switch Number 1
Bit Position
Figure 2-P