The display positions on the screen for LD-V8000 are pictured below:
Line 0 is used for displaying chapter number and frame number
or time code.
Line 0 and 1 are sometimes used for displaying remote control
inputs.
Line 2 to 11 are used exclusively as the User’s Display Area.
If Line 0 and 1 are not used for the player’s display system; if
there is no data input to be displayed from the remote control;
and if the frame or time code or chapter number display is
disabled, then those two lines can also be used as part of the
User’s Display Area.
To activate the User Display Area:
• Set the User’s Display using the Register A command.
• Turn ON the display switch.
• Identify the line that the characters will appear on by means of an integer
(0-11, usually 2-11) and the Print Character command (PR) <CR>.
• Then send the character string to be displayed followed by <C/R>.
The display switch can be turned ON or OFF at any time. However, if Register A is
changed so that the User’s Display Area is disabled, the contents of the User’s
Display Area will be cleared. Also, if the Print Character command is issued before
Register A is set for the User’s Display Area, the character string will not be seen.
LD-V8000 Level I & III • Chapter Four
LD-V8000 Level I & III User’s Manual
TP 113 v. 2.1 • 2/93
4-49
REGISTER A SET
Figure 4-U
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■
User’s Area
■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■
12 lines x 20 Characters
■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■
Line 0
Line 1
2
3
4
5
6
7
8
9
10
11
Chapter (CAV or CLV)
Frame (CAV) or Time(CLV); Extended Time (discs with 24-bit code)
