The player is in
Door Open
before the disc is loaded into the disc tray. If a disc is in
the disc tray and Power-On Start and Load Start On-Screen Functions are OFF, and
the door is closed, the player enters
Park.
When a START or PLAY command is input
while the player is in
Park,
the disc starts rotating and the player enters
Spin Up
.
When the player is ready to play images, it enters
Random Access. Random Access
is
further divided into
Play
,
Still
,
Scan
,
Pause
,
Multi-Speed
, and
Search.
Special effects such as Freeze Frame, Multi-Speed, Sound-Over-Still, etc. are
possible only when the player is in
Random Access
.
When a REJECT command is input, the player enters
Spin Down
, image playback
stops immediately, and disc rotation is gradually stopped, then the player enters
Park
.
The
Figure 2-B
, below, describes how the active states change within the player.
Chapter Two • LD-V8000 Level I & III
2-4
TP 113 v. 2.0 • 2/93
LD-V8000 Level I & III User’s Manual
See illustrations of the front and rear panels of the LD-V8000 videodisc player on
the next page. These will be referred to in subsequent sections of this manual.
PLAY
STILL
SCAN
PAUSE
MULTI-SPEED
SEARCH
RANDOM ACCESS
OPEN
CLOSE
DOOR OPEN
PARK
SPIN UP
SPIN DOWN
Transitions from one Active State to another
Figure 2-B