11
Enjoying through External Equipment
69
En
Connecting other audio equipment
The digital audio output terminal (optical) on this
system can output Dolby Digital signals. Using an
optical digital cable, connect an AV receiver to the
digital audio output terminal (optical) on the rear of the
Media Receiver. This allows audio such as digital TV
broadcasting to be played in high quality.
Media Receiver (rear view)
I N
SERVICE ONLY
MONITOR OUT
DIGITAL OUT
OPTICAL
INPUT 1
COMPONENT VIDEO
S400
DTV-ANTENNA
IN
INPUT 3
VCR
CONTROL
A ANTENNA/CABLE B
OUT
I N
I N
OUT
CONTROL
OUT
S-VIDEO
S-VIDEO
S-VIDEO
R-AUDIO-L
R-AUDIO-L
Y
AC INLET
BLACK
WHITE
SYSTEM CABLE
R-AUDIO-L
R-AUDIO-L
Y
C
B
/P
B
C
B
/P
B
C
R
/P
R
C
R
/P
R
VIDEO
VIDEO
VIDEO
INPUT 2
(TS)
AV receiver
Audio cable
(commercially available)
Optical digital cable
(commercially available)
Switching the optical audio signal type
Set up for the DIGITAL AUDIO output terminal (OPTI-
CAL), depending on your AV receiver.
1
Press
HOME MENU
.
2
Press / to select “DTV Setup”, and then press
ENTER
.
3
Press / to select “Digital Audio Out”, and then
press
ENTER
.
If your AV receiver does not have a digital audio input
terminal (optical), connect the MONITOR OUT termi-
nals (AUDIO) on the rear of the Media Receiver to the
audio input terminals on the AV receiver.
• When using the digital audio output terminal (opti-
cal), you need to make settings depending on your AV
receiver. For more information, see the user’s manual
for the AV receiver.
Connecting an AV receiver
4
Press / to select “Dolby Digital” or “PCM”, and
then press
ENTER
.
Digital Audio Out
Dolby Digital
PCM
Item
Description
PCM
Always outputs in the PCM format
(factory default)
regardless of the types of signals.
Dolby Digital
For Dolby Digital encoded signals, outputs
in the Dolby Digital format. For PCM
encoded signals, outputs in the PCM
format.
5
Press
HOME MENU
to exit the menu.
PDP-ELITE-Eng (65-80)
9/9/03, 11:46
69
