08
Basic Operations
34
En
Plasma Display
(right view)
Channel display
8
AAA
STEREO
STANDARD
FULL
Watching digital TV channels
Unless you set up digital TV channels that you can
watch under the current conditions, you cannot tune in
those channels. For the procedure, see “Setting up
digital TV channels” on page 44.
Selecting the digital TV input
After confirming that the Mode switch on the remote
control unit has been set to “TV”, press
DTV
on the
remote control unit to select the input source for digital
TV channels.
Changing channels
Using CH
+
/
–
on the remote control unit
• Press
CH
+
to increase the channel number.
• Press
CH
–
to decrease the channel number.
•
CHANNEL
+
/
–
on the Plasma Display operates the
same as
CH
+
/
–
.
Using CH RETURN on the remote control unit
Press
CH RETURN
to switch the currently tuned
channel to the previously tuned channel.
Press
CH RETURN
again to switch back to the
currently tuned channel.
Using 0 – 9 and • (dot) on the remote control
unit
Select channels directly by pressing buttons
0
to
9
. To
select subchannels, also use the • (dot) button.
EXAMPLE
• To select channel 5 (1-digit channel), press
5
.
• To select channel 25 (2-digit channel), press
2
,
followed by
5
.
• To select channel 125 (3-digit channel), press
1
, then
2
, followed by
5
.
• To select subchannel 2.1, press
2
, • (dot), then
1
.
• To select subchannel 10.1, press
1
,
0
, • (dot), then
1
.
• After entering a channel or subchannel number, you
may press
CH ENTER
to tune in the channel more
quickly.
C/–
PDP-ELITE-Eng (28-37)
9/9/03, 11:44
34
